1000Base-TX Port |
24G port RJ-45 auto-MDI/MDI-X |
Uplink Port |
4G combo (either 4G RJ45 or 4G SFP) |
Performance Specification |
Bandwidth: 256Gbps
Packet Buffer Memory: 16Mbit
Packet Forwarding Rate: 131Mpps
MAC Address Table: 16K |
Installation |
Rack mounted |
Maximum Frame Size |
10240bytes packet size |
Flow Control |
Back pressure for half duplex, IEEE 802.3x pause frame for full duplex |
Enclosure |
IP40 Aluminum housing |
LED Indicator |
Power: Red
Fiber: Link 2(Green)
Ethernet: Yellow |
Dual Power Input |
36 to 72V DC and AC110-240V |
Power Consumption |
< 10W |
Surge protection |
± 4KV |
Network Protocols |
IEEE802.3 10BASE-T;
IEEE802.3i 10Base-T;
IEEE802.3u;100Base-TX/FX;
IEEE802.3ab 1000Base-T;
IEEE802.3z 1000Base-X;
IEEE802.3x; |
Network cables |
10BASE-T: Cat3,4,5 UTP(≤100 meter)
100BASE-TX: Cat5 or later UTP(≤100meter)
1000BASE-TX: Cat6 or later UTP(≤100 meter) |
Industry Standard |
FCC CFR47 Part 15,EN55022/CISPR22, Class A
IEC61000-4-2 (ESD): ±8kV (contact), ±12kV (air)
IEC61000-4-3 (RS): 10V/m (80~1000MHz)
IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV
IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV
IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz)
IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s)
IEC61850 standards |
Certification |
CE FCC Rohs compliance |
MTBF |
>300,000hours |
Dimensions (W x D x H) |
442×325×44mm |
Weight |
Product Weight: 3.26KG
Packing Weight: 4KG |
Working Environment |
Working temperature: -40~85℃.
Storage temperature: -40~85℃
Relative Humidity: 5%~95 %( no condensation) |
Software |
Port Features |
IEEE 802.3x Flow control
Interface counters
Storm Control |
Link Aggregation |
Static Aggregation
Dynamic Aggregation, LACP
Supports up to 8 aggregation groups, each group up to 8 ports
Support source MAC, destination MAC, source destination MAC, source IP, destination IP, source destination IP routing strategy |
MAC Table Management |
Support |
Forwarding mode |
Support IVL forwarding mode |
Static MAC Address |
Support |
MAC Address Binding |
Support |
MAC Address Filtering |
Support |
Mirror |
Port-based Mirror |
Spanning Tree |
IEEE802.1d STP
IEEE802.1w RSTP
IEEE802.1s MSTP |
ERPS (G.8032) |
Single Ring, Sub-Ring, Multi-Ring
Load balance
Recovery Time < 50ms |
GVRP |
Supported |
QINQ |
VLAN-based QinQ |
LLDP |
LLDP
LLDP-MED |
Loop Protection |
Supported |
VLAN |
4094 VLAN
Port-based VLAN
GVRP |
Protocol VLAN |
MAC-based VLAN
IP Subnet-based VLAN |
Voice VLAN |
Static entry
LLDP-MED |
Port Isolate |
Support |
IGMP |
Snooping IGMP V1 Snooping
IGMP V2 Snooping
IGMP V3 Snooping
Source Port Check
IGMP Fast Leave
IGMP Filter |
MLD Snooping |
MLD V1 Snooping
MLD V2 Snooping
Source Port Check
MLD Fast Leave
MLD Filter |
Security |
ACL |
ACL (IP Standard ACL), IPv4/IPv6
MAC extend ACL
IP extend ACL
L2, L3, L4 fields match
log, redirection, mirroring, speed limit |
QoS |
QoS Class, Remarking
SP, WRR queue scheduling
Ingress port-based rate-limit
Ingress priority-based rate-limit
Egress port-based rate-limit
Egress queue-based rate-limit
Policy-based QoS
Storm Control
8 queues per port |
Dot1x |
Port Access Control
User Access Control
MAC-address Access Control |
AAA |
Support 802.1x
Support RADIUS
Supports authentication, authorization, and accounting through RADIUS server |
Management |
User management |
Password protection |
SNMP |
SNMP V1/V2c/V3 |
RMON |
Statistics Group
History Group
Alarm Group
Events Group |
Web management |
HTTP V1.1, HTTPS |
Firmware Upgrade |
Reversion Upgrade |
IPv4/IPv6 |
Support |
CLI |
Support |
Syslog/Debug |
Support |
Diagnosis |
Ping (IPv4), ping (IPv6)
Trace route(IPv4)
Trace route(IPv6) |
Management |
NTP |
NTP Client |
DHCP |
DHCPv4 Client, DHCPv6 Client |
DHCP Snooping |
DHCP snooping table
Trust Port |
IPv6 DHCP-Guard |
Support |
Telnet |
Telnet Server |
TFTP |
TFTP Client |
SSH |
SSH Server |